2 Ton 150 Psi DZH Manual Type Wood Chips Fired Steam Boiler For Fertilizer Factory
DZH type steam boiler body for the "A" structure, uniform heating surface, and the use of A certain radian, elastic, easy to expand and shrink the water wall pipe and strengthen the heat transfer of the screw pipe smoke pipe, the maximum to ensure the safety and efficiency.The pot shell, tube plate and other pressurized parts are elastic or quasi-elastic, which can improve the stress state to the greatest extent.The wing-shaped flue structure is adopted on both sides of the pot shell, which can effectively reduce the heat deviation of the system and ensure the heat transfer of the system is efficient and stable.The lower part of the boiler body is provided with an ascending tube, and there is no stagnant water in the pot, which can effectively solve the overburning and bulging at the bottom of the pot shell.The system itself has a certain self-dedusting ability to meet the increasingly stringent environmental requirements.
This biomass steam boiler has high automation level, automatic adjustment of boiler feed water, high and low water level alarm, low water level interlock protection, and interlocking protection of lead and blower. Auxiliary auxiliary equipment is complete.
Steam Boiler Feature
1. The biomass steam boiler is equipped with drum and induced draft fan to mechanical ventilation, combustion equipment with compact dense hole grate, especially suitable for biomass fuel combustion.
2. By manual feeding, the flame through the back wall to the combustion chamber after the combustion, up into the airfoil flue, and then through the front smoke box thread smoke tube, through the economizer, air pre-heater, duster and induced draft fan to the chimney and finally into the atmosphere.
1. High Thermal Efficiency
1.1 Spirally corrugated tube strengthen the heat transfer and improve thermal efficiency. Flue gas has the foundation of disturbance, avoid ash depositing in tube.
1.2 Furnace wall was poured entirely by heat-resistance concrete and high temperature resistance refractory brick, excellent leakproofness and no air leakage. Boiler shell use aluminium silicate board for heat preservation, low heat loss.
1.3 Equip with economizer, make full use of heat of flue gas, decrease the exhaust smoke temperature, increase thermal efficiency.
2. Avoid Bulging
Riser tube bundle under boiler drum, remove the dead water region at the bottom of drum, sludge is not easy for depositing, the high temperature area of drum has better cooling, prevent bulging.
3. Avoid Tube Plate Cracking
3.1 The boiler adopts arched tube plate and spirally corrugated tube, change the quasi-steel body into quasi-elastic body structure, reduce stress.
3.2 Arrange two sides gas duct in drum, the smoke gas could enter into the front smoke chamber smoothly, the temperature of tube plate is lower than 600℃, avoid cracking leaded by high temperature.
4. Sufficient Output
Adopts horizontal type three pass structure and large furnace, to ensure the sufficient combustion, and the boiler could absorb the thermal expansion effectively. The large diameter boiler drum increases the radiant heating surface, to ensure the sufficient output.
5. Environmental protection
5.1 The splayed wall and smoke outlet have the function of dust removal, decrease the concentration of smoke emission.
5.2 The moving grate boiler adopts several environmental protect measures ( bag dust collector, double towers desulfurization, etc.) to meet national emission requirements.
Technical Parameter
Model
Item |
DZH0.5-0.7-AII
DZH0.5-1.0-AII |
DZH1-0.7-AII
DZH1-1.0-AII
DZH1-1.25-AII |
DZH2-0.7-AII
DZH2-1.0-AII
DZH2-1.25-AII
DZH2-1.6-AII |
DZH4-1.25-AII
DZH4-1.6-AII |
Rated evaporation
capacity (t/h) |
0.5 |
1 |
2 |
4 |
Working
pressure(Mpa) |
0.7/1.0 |
0.7/1.0/1.25 |
0.7/1.0/1.25/1.6 |
1.25/1.6 |
Rated steam
temperature(℃) |
170/184 |
170/184/194 |
170/184/194/204 |
194/204 |
Feed water
temperature(℃) |
20 |
20 |
20 |
20 |
Effective area of
grate(m2) |
1.28 |
2.1 |
3.36 |
5.2 |
Fuel consumption
(Kg/h) |
76 |
150 |
301 |
602 |
Exhaust flue gas
temperature(C) |
165 |
165 |
165 |
165 |
Thermal Efficiency
(%) |
80 |
80 |
80 |
80 |
| Size(m) |
3.2x 2.0x 2.6 |
4.1x 2.2x 2.9 |
4.7x 2.3x 3.2 |
5.6x 2.5x 3.5 |
| Weight (t) |
8 |
12 |
15 |
22 |
Application for biomass steam boiler
Wood fired steam boiler is suitable for painting room, drying box, drying tower painting line and other purposes.It is especially suitable for central heating in urban residential areas, industrial production, enterprises and institutions, schools, hotels, bath centers and other places where heating, hot water and steam are needed.
After-sales Services:
1. Assist clients to prepare for the first construction, and also can arrange engineer on-site instruction of installation and commissioning
2. Install and debug the equipment;
3. Train the first-line operators, application of theoretical learning + product cognitive learning + examination + practical repeated operation learning + phased procuratorial learning effect
Factory assurance:
1. One year quality assurance system;
2. Provide professional and high-quality parts according to the factory price;
3. It can be designed and produced according to the user's voltage frequency;
4. 100% tested before delivery;
5. Skid-mounted complete system available 180-- 3000 kw;
6. Complete system fixed on Skid rack available 180-- 3000 kw;
7. Engineer on-site instruction of installation and commissioning available, and remote guidance and video services.
Product Tags:
|
|
2 Ton 150 Psi DZH Manual Type wood Chips Fired Steam Boiler For Fertilizer Factory Images
|
